CABINET ASSEMBLY
- Each item is supplied with the hardware required for assembly including screws, adjustable legs, nails, cam locks, screw covers, kickboards and kickboard attachment clips as well as easy to follow instructions
- Remember to always work on a flat surface to ensure the cabinet will be square and flush and follow the instructions (the cabinets are provided with pre drilled holes which takes the guess work out of the process)
|
|
INSTALLING & FIXING WARDROBE CABINETS
- Once the first cabinet is in position, at the lowest point and level, set the adjustable legs to a height of 145mm as this is the maximum height of the kickboard.
- Then, position and level the next cabinet by adjusting the legs so it sits at the same height and level to the first.
- Check levels and then clamp, pre-drill, countersink and fix the cabinets together.
  |
| Once the cabinets are in place, check levels one last time and using 65mm screws (not provided) fix to the wall. If your wall is masonry or an alternative substrate to studs, consult you hardware specialist for the appropriate fixing method. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
